FTI offers the only production worthy automatic test solution for consistently and reliably characterizing Gallium Nitride (GaN) high power FET and HEMT devices.
Why do GaN semiconductor manufacturers need the FTI 1000 and production worthy “Dynamic On-Resistance: RDS(on)” proprietary test methodology?
The popularity of GaN semiconductor devices is increasing in today’s market due to the emergence of new technologies and the rising application areas where GaN devices outshine and outperform their Silicon counterparts. GaN devices are providing huge opportunities in vertical market sectors such as automotive (hybrid electric vehicles), Information and Communication Technology (Cloud servers), and Aerospace (Hi-Rel).
Overcoming GaN Market Barriers With Well Characterized and Tested Devices
Along with the high performance and attractive operating characteristics of GaN devices come the practical considerations for deployment which bring unique reliability challenges. In order to overcome the barriers of reliability and repeatable performance characteristics, and the reluctance of designers to design their systems with GaN devices, GaN manufacturers can provide well characterized and tested devices. In addition, detailed data sheets with performance specifications and operating condition ranges go a long way in providing confidence to design engineers that their systems will operate and perform as designed.
GaN Design and Test Considerations
Performance and Reliability in GaN devices has thus become a huge area of interest for automatic test equipment providers and GaN device manufacturers. It is well accepted in the industry that the current collapse effect limits the performance and reliability of GaN devices. The current collapse phenomenon appears as a transient and recoverable reduction in drain current after the application of high Drain-Source voltage. This phenomenon can be characterized with a measurement technique called “Dynamic On-Resistance: RDS(on)”.
GaN device manufacturers must have this test data in order to adequately test and characterize the high performance devices that they are providing to the systems design marketplace. Moreover, the necessary tests must be able to be executed quickly, consistently, and reliably in a production test environment. Because the current collapse effect is the most significant impediment to reliable and consistent device operation, the Dynamic On-Resistance test can and should be utilized as a pass/fail or quality binning criteria.
Another important design parameter is threshold shift. We also can measure the gate threshold voltage VGS(th) accurately, without applying higher voltage to the gate. This allows us to measure the threshold shift repeatably.
Another key factor we can offer is testing of both enhancement mode (e-Mode) and depletion mode (d-Mode) devices with thresholds to 35V and more.
The Solution: FTI-1000 and Dynamic Rdson test methodology.
Testing of high performance GaN devices differs from that of Silicon or SiC because of the parasitic devices that are present in the substrate due to the defects caused by lattice mismatch between the GaN epitaxial layer and the Silicon or Silicon Carbon substrate. These parasitic devices cause the GaN device to behave differently under varying test conditions. The results are not often trustworthy because the number and behavior of the parasitics vary across the wafer, as well as wafer to wafer. The problem is compounded by the GaN device behaving differently over time. The history of earlier conditions on the device as well as the timing of those conditions changes the behavior of the device, so accurate and repeatable timing of the testing is essential.
Test sequence is also of concern, because performing multiple tests in a different order, or with a different time period between tests, will also produce different results.
The importance of measuring Dynamic Rdson
This test, when executed correctly, can determine whether a particular device is “good” or not. Different devices exhibit this behavior to different extents depending on the number and location of the substrate defects. Devices must be tested in fabrication, on the wafer, to be able to determine if the entire wafer, or parts of the wafer are not performing acceptably. The RDS(on) test can be done as part of a test sequence in a single pass on a wafer.
This capability; to test every die on the wafer to determine its quality prior to packaging, is unique to Focused Test and the FTI-1000. FTI is the only provider of automatic test equipment and technology that can accomplish this testing in a production environment.
- Gate driver goes to -15V to start with DUT Off.
- Drain RDS Measure Supply is applied (5V @ 10A).
- Gate is pulsed high (0V) to turn on DUT. Digitizer captures ID and VDS.
- Gate is driven low to turn off DUT, Vstress is applied (30V).
- Gate is driven high to measure RDS after stress. Digitizer Captures ID and VDS.
- Vstress is shut off, and Drain Measure supply is shut off. Gate remains on to discharge stray capacitance.
- Gate driver supplies are turned off.
Register for Login to gain access to the Dynamic Rdson Testing on FTI-1000 Application Note.
To find out more, Contact Focused Test
Comments or questions are welcome.
Increase PC speed
Go to Power Options form. One method is via the Control Panel:
In the Power Options form, select Change plan settings item of the selected plan.
In the Edit Plan Settings form, select the Change advanced power settings item:
In the advanced power settings form, scroll down to the Processor power management section.
If the PC has the ability to dynamically change clock speed, there will be a Minimum processor state and a Maximum processor state. If the PC does not have the ability to dynamically change clock speed, there may be only the System cooling policy, or may even lack the Processor power management group.
Set the Minimum processor state to 100 (typically is 5). Insure the Maximum processor state is 100.
Note: Do not leave Minimum processor state at 100 on a laptop. It will more quickly run the battery down.
Fixing the Error when Closing FTI Studio Production
(How to make a Shortcut to FTI Studio Production)
On closing FTI Studio Production, if you get this error message:
This means that you are not running the program in Administrator mode.
Sometimes when the FTI Studio software is installed, the installer fails to properly create the shortcut to run the program with the Administrator mode set. The easiest way to fix this is to create a new shortcut yourself. On the desktop, right click the mouse, click “New” and “Shortcut”. This brings up the “Create Shortcut Wizard”. For the location, browse to
C:\Program Files (x86)\Focused Test Inc\FTI Studio\FTIStudioProduction.exe.
(If you are using a 32 bit Windows, then the location will be
C:\Program Files\Focused Test Inc\FTI Studio\FTIStudioProduction.exe)
Set the name “FTIStudio Production”, and click finish. This will create a generic shortcut that looks like
You now need to select this shortcut, and right click to be able to change the properties. That will bring up the properties screen which should look like this: